1. INSTRUCTION

GENERALLY, CERAMIC AND GLASS DECALS ARE FIRED AT HIGH TEMPERATURES FROM 500º - 1,350º C ( 1,020 - 2,462º F), BUT ORGANIC COLOR CHANGING INKS CANNOT BE USABLE AT SUCH HIGH TEMPERATURES. THE COLOR CHANGING INK IS DEVELOPED TO BE APPLIED AND GLAZED AT A TEMPERATURE OF 100º - 150º C (212º - 302º F).

2. USAGE

CERAMIC, GLASSWARE

STICKER, SEALS

TOWELS, T-SHIRTS, NAPKINS, HANDKERCHIEF

PICTURE BOOKS IN BATH, PLUSH TOYS.

3. THE RANGE OF COLOR CHANGE

4 COLOR CHANGING INKS

BASIC RED, ORANGE, BLUE, GREEN AND BLACK

5. HOW TO USE

CUT THE DECAL FROM THE SHEET, AND PLACE IT IN WARM WATER FOR ABOUT 2 TO 3 MINUTES OR UNTIL THE DECAL STARTS TO SLIDE OFF THE PAPER. THE WATER MUST BE CHANGED FREQUENTLY TO AVOID GLUE RESIDUE TO RUIN THE DECALS.

TAKE EXCESS WATER AND AIR BUBBLES WITH A RUBBER SQUEEGEE.

DRY AT ROOM TEMPERATURE FOR ABOUT 20 TO 30 MINUTES.

6. FIRING

DEPENDING ON THE FIRING CONDITIONS, THE QUALITY OF THE DECAL MAY VARY. OIL OR OXYGEN IS NOT IMPORTANT.

THE THICKNESS OF THE ARTICLES TO FIRE PLUS THE QUANTITY OF THEM PLACED IN THE KILN WILL DECIDE THE FIRING CYCLE (20 - 30 MINUTES AT 150º C ) 302º F.

IN A LEAR (TUNNEL KILN), BEGINNING TEMPERATURE SHOULD NOT BE OVER 150ºC (302º F). AT PEAK TEMPERATURE (150º C) THE ARTICLES SHOULD BE LEFT IN THE KILN FOR ABOUT 20 - 30 MINUTES, BUT IN A REGULAR SHUTTLE KILN, JUST KEEP GOODS ABOUT 20 - 30 MINUTES AT 150º C (302º F) AND THEN YOU CAN REMOVE THEM.

AFTER FIRING, ELIMINATE THE COVER COAT, AND CLEAN THE GOODS.

Back To Top